TWIN SPOT LED RECHARGEABLE FIRE EMERGENCY LIGHT 8051

1. MODEL NO.:8051/18L/NM/6500K
2. REATED INPUT VOLTAGE:AC220-240V
3. FREQUENCY:50/60Hz
4. LUMINAIRE:2×18 pcs high power LED
5. RATED OUTPUT LUMENS :2×90IM
6. EMERGENCY DURATION:≤ 3 HOURS
7. RATED OUTPUT POWER : 3W
8. TIME OF RECHARGE:20 HOURS
9. FUSE INSTALLED OR REPLACED:3A
10. BATTERY STANDARD:6V 1.3Ah Rechargeable battery

NOTE:

1. THE TWIN SPOT LED RECHARGEABLE FIRE EMERGENCY LIGHT NEEDS TO BE CHARGED FOR 20 HOURS BEFRORE FIRST OPERATION. IF NOT USED REGULARLY. IT SHOULD BE CHARGED ONCE EVERY THREE MONTHS.
2. IT IS INLY ALLOWED TO USE THE FUSE WITH THE SAME SPECIFICATION(3A) FOR REPLACEMENT.

 

WIN SPOT LED RECHARGEABLE FIRE EMERGENCY LIGHT 8051 SERIES high quality LED fire safety emergency lamp offer more safeguard to the people and property. It is suggest he replace the 15 times power wattage incandescent type emergency lamps or 3 times power wattage type fluorescent tube lamps. For new building, we strongly suggest you use the 8051 LED type emergency lamp to protect our world and save your money.

·Suitable for the Damp locations;

·8051 LED emergency lamp can automatic light up or indicated the escape passageway to disperse the people, when the mainly power supply fall off in the situation, such as :conflagration, earthquake, power shortage and others disasters.

· More than 80% energy saving compared to the traditional incandescent bulbs.

· For the LED light with 30°to 120°output angle, more effective light output than the incandescent bulbs and fluorescent tube with 360°output angle. For example, the 1W LED can be equivalent or  (replace) a 15W incandescent bulb.

· 7lumen (23*0mil chip) per cool white LED(0.06W), which means that the LED efficacy is over 100lm/W, higher lumen efficiency than fluorescent  tube.With CRI up to 80-90.

· Long life span up to 500 times discharge, free maintenance.

· With innovative switches ON/OFF button, the button are light press and beautiful. With switches, offer more safeguard in long time power if, such as especially important at earthquake, ground sea. Connect the lamp to AC power, it can automatic light up in case AC fail whenever the lamp is on or off.

Features

· Step down transformer makes sure good and steady performance, transformer is separate fixed.

Safety for PCB and far from the battery to protect battery from high temperature.

· Low power consumption, Low heat radiation, No glass to break, No hot filament , No gas.

Green light source, no mercury , no UV or IR which is good for using in museum and library;

· Ul94V-0 flame rating Injection-molded thermoplastic ABS housing.

Innovative, snap-together design allows for fast and easy installation

Two fully adjustable glare-free Square shape light heads for emergency light

· PTC resistor offer excelum constant current protection to LED, PTC built-in main circuit PCB to reduce heat in LED PCB.

6pcs SMD branch-resistors each LED bulbs to perfect protect the LED.